Products

SUNrise Air Conditioning Equipment Limited have different products for different needs of different customers

Multi-outlet Attenuatormore_vert

Details

Multi-outlet Attenuatorclose

Structure:

 

  • 0.8 to 1.0mm G.I structure

  • 25 mm and 48 kg/m3 fiberglass internal insulation, facing with marglass and perforated metal sheet protection. Meets requirement of BS476 part 6 and HKFSD regulation

  • Maximum 5 outlets

  • Outlets equipped with manual Volume Control Damper (VCD)

  • Completed with J2 flange
Single Duct VAV Boxmore_vert

Details

Single Duct VAV Boxclose

Features:

 

  • Ranges from 31 L/s to 1888 L/s
  • Pressure independent operation
  • Variable air or constant air volume application
  • Electronic or direct digital control
  • Factory calibrated to fit job requirement
  • External mounted DDC controller panel
  • Connection bead offers secured flex duct connection
  • Full range of accessories (coil, attenuator etc)

 

Structure:

 

  • 0.8 to 1.0mm G.I Structure

  • 25 mm and 48 kg/m3 fiberglass internal insulation, facing with marglass and perforated metal sheet protection. Meets requirement of BS476 part 6 and HKFSD regulation

  • Blade type damper formed by two layers of heavy gauge galvanized steel with sandwich peripheral gasket

  • Plated damper shaft is mounted in self-lubricated bearings

  • UL 94 type pneumatic tubing

  • Discharge with completed J2 flange and meet DW 144 requirement

  • Special liner and insulation available

 

VAV Model l / s   c f m
Minimum Maximum   Minimum Maximum
VAV - 5000 - 06 31 212   66 450
VAV - 5000 - 08 62 378   132 800
VAV - 5000 - 10 104 637   221 1350
VAV - 5000 - 12 143 991   304 2100
VAV - 5000 - 14 207 1416   439 3000
VAV - 5000 - 16 268 1888   568 4000
VAV box with Series Fan Power Unitmore_vert

Details

VAV box with Series Fan Power Unitclose

Common Applications:

 

  • Exterior zones where heating and cooling loads may vary considerably and occupancy variances allow the central system to be shut-down or setting back.

  • Situations where central system economy is desired.

  • Occupant comfort is also very important as the constant volume air delivery leads to optimal air distribution efficiency

 

Features:

 

  • Pressure independent operation
  • Electronic or direct digital control
  • Factory calibrated to fit job requirement
  • External mounted DDC controller panel
  • Connection bead offers secured flex duct connection
  • Full range of accessories (coil, attenuator etc)
  • Wide range speed blower
  • Integrated 3 speed and variable Fan speed switch

 

Structure:

 

  • 0.8 to 1.0mm G.I Structure
  • 25 mm and 48 kg/m3 fiberglass internal insulation, facing with marglass and perforated metal sheet protection. Meets requirement of BS476 part 6 and HKFSD regulation
  • Blade type damper formed by two layers of heavy gauge galvanized steel with sandwich peripheral gasket
  • Plated damper shaft is mounted in self-lubricated bearings
  • UL 94 type pneumatic tubing
  • Discharge with completed J2 flange and meet DW 144 requirement
  • Special liner and insulation available
Electric Heater Sectionmore_vert

Details

Electric Heater Sectionclose

Structure:

 

  • 0.8 to 1.0mm G.I structure
  • 25 mm and 48 kg/m3 fiberglass internal insulation, facing with marglass and perforated metal sheet protection. Meets requirement of BS476 part 6 and HKFSD regulation
  • Can be equipped with 0.5kw, 0.75kw, 1.0kw, 1.5kw or 2.0kw thermal heater
  • Equipped with thermal circuit breaker and AC contactor
  • Electric control box available
  • J2 flange in both inlet and outlet
  • Can be connected to VAV Box by drive slip
  • Galvanized iron fit DW144 Standard
  • Section Model Heater Capicity Size
    EH-06-XK 1KW,1.5KW,2 KW  305 x 203 x 600
    EH-08-XK 1KW,1.5KW,2 KW  305 x 254 x 600
    EH-10-XK 1KW,1.5KW,2 KW  356 x 318 x 600
    EH-12-XK 1KW,1.5KW,2 KW  406 x 381 x 600
    EH-14-XK 1KW,1.5KW,2 KW  508 x 445 x 600
    EH-16-XK 1KW,1.5KW,2 KW  610 x 457 x 600
    *x is the Heater capacity
  • VAV+ Section Model Heater  Size
    VAV-50EX-06 1KW,1.5KW,2 KW  305 x 203 x 1000
    VAV-50EX-08 1KW,1.5KW,2 KW  305 x 254 x 1000
    VAV-50EX-10 1KW,1.5KW,2 KW  356 x 318 x 1000
    VAV-50EX-12 1KW,1.5KW,2 KW  406 x 381 x 1000
    VAV-50EX-14 1KW,1.5KW,2 KW  508 x 445 x 1000
    VAV-50EX-16 1KW,1.5KW,2 KW  610 x 457 x 1000  
    **x is the Heater Steps (1,2,3)
Hot Water Coilmore_vert

Details

Hot Water Coilclose

Structure:

 

  • 0.8 to 1.0mm G.I structure
  • 25 mm and 48 kg/m3 fiberglass internal insulation, facing with marglass and perforated metal sheet protection. Meets requirement of BS476 part 6 and HKFSD regulation
  • J2 flange in both inlet and outlet
  • Brass aluminum leaf water coil with maintenance opening
  • Galvanized iron fit DW144 Standard
Saddle Type Light Troffer Diffusermore_vert

Details

Saddle Type Light Troffer Diffuserclose

Material:
• Galvanized zinc
• Coated steel

Feature:
• Designed with the latest environmental engineering techniques to achieve good room air distribution and low operating noise to ensure maximum comfort conditions on air-conditioned space
• Designed to attenuate air duct system noise
• Most ceiling component diffusers consist of engineered plenum sections with a variety of air pattern controllers at the discharge face
• Designed to be fitted to any type of slot diffusers
• The compatibility of the diffuser and light fixture is very important – we worked hard to ensure the compatibility of the two components
• Suitable for VAV system

Specification:
• Available as single-sided models or saddle (double-sided) models
• Available in 1 to 4 slot types
• Optional external foil-backed insulation is available
• Specific sizes can be tailor-made

Accessories:
• Inner coated fiberglass insulation
• External aluminum foil backed fiberglass insulation
• Compliment with slot diffusers
• Suitable for VAV system
• Complimentary for perforated diffusers
 



footer-pattern